Assessment Validation 101: Guide to Validating Assessments
Assessment Validation 101: Guide to Validating Assessments
Blog Article
RTOs face many tasks after registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation is typically the most daunting.
We've covered validation in many articles, but it's worth re-examining. ASQA defines it as a quality review of the assessment procedure.
In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.
The SRTOs 2015 Clause 1.8 specifies that RTOs need to ensure compliance of their assessment systems, including RPL, with training package requirements, following the Principles of Assessment and Rules of Evidence.
The standards mandate two types of validation.
The primary validation type ensures compliance with the training package requirements for your RTO's assessments.
The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.
This suggests we perform validation both before and after the assessment. This article will concentrate on the first type—assessment tool validation.
The Two Types of Assessment Validation Explained
Clarifying Assessment Validation
As mentioned earlier and in our earlier blog entries, validation is divided into two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, often referred to as pre-assessment validation or verification, deals with ensuring all unit requirements are addressed as per the first part of the clause, ensuring complete workbook compliance.
Conversely, post-assessment validation focuses on the implementation side, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.
In this write-up, we will focus on assessment tool validation.
How Assessment Tool Validation is Conducted
Now that we’ve differentiated the two types of validation, let’s examine assessment tool validation in detail.
When to Conduct Assessment Tool Validation
Assessment tool validation ensures that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.
This implies that any time you get new learning resources, assessment tool validation must be done before they are used by students.
You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.
However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:
- resources are updated
- new training products are added by you on scope
- course is reviewed by you against training product updates
- you identify your learning resources as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based approach means RTOs should carry out regular risk assessments. If students complain about learning resources, it's an ideal time for assessment tool validation.
What Training Products Should Be Validated?
Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.
Starting Assessment Tool Validation: What You Need
Study Resources
For validation of your assessment tools, you will require the full set of your learning resources:
Mapping tool – this should be the first document to examine. It shows which assessment items correspond to unit requirements, facilitating quicker validation.
Learner/student workbook – during validation, check if it's suitable as an assessment tool. Ensure instructions are clear and answer fields are sufficient. This is a common gap.
Assessor guide/marking guide – check that instructions for assessors are adequate and that there are clear benchmarks for each assessment item. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – might include checklists, registers, and templates created apart from the workbook and marking guide. Validate them to ensure they fit the assessment task and address unit requirements.
Validation Panel
Clause 1.11 outlines the criteria for validation panel members, specifying that validation can be done by one or more people. RTOs typically require all trainers and assessors to participate, occasionally inviting industry experts.
Your validation panel must, as a group, possess:
Current vocational competencies and relevant industry skills for the unit being validated
Current knowledge and skills in vocational teaching and learning
Any one of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or its successor
Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool is advantageous for both the validation process and documentation. It aids in viewing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.
ASQA does not specify a required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools as a whole to ensure they meet the principles of assessment.
Assessment Principles Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.
It is highly recommended to use a more detailed template for inspecting each unit requirement and the assessment items that map to them. Below is an example:
Element Performance Criteria Assessment Guidelines Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Checked?
As mentioned in our blog post Common Problems In Assessment Tools, it’s crucial that your assessment tools enable trainers to follow assessment principles and evidence rules.
Assessment Basic Principles
Fairness – Are equal opportunities and access offered to everyone in the assessment process?
Flexibility – Are different options provided in the assessment to demonstrate competence based on individual needs and preferences?
Validity – Is the assessment measuring what it is supposed to measure? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment achieve consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?
Basic Rules of Evidence
Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to confirm the learner has the required skills and knowledge?
Authenticity – Does the assessment tool ensure that the work is the candidate’s own?
Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?
Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.
To avoid using learning resources that leave certain unit requirements unaddressed, ensure you adhere to these guidelines:
Practice What You Preach
Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Complete each of the following actions at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
diapering
prepare bottles, feed babies from bottles, and clean equipment
prepare solid foods and feed infants
respond suitably to baby signs and cues
prepare and settle babies for sleep
monitor and support physical exploration and gross motor skills appropriate for the age
Having students describe the nappy-changing process for babies under 12 months doesn’t fulfill the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement more info asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
All or Nothing
Observe the lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Be More Specific?
Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Hence, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What type of information can be included in a work package?
Answers may include:
Necessary resources
Relevant expenses
Duration of activities
Assigned duties and responsibilities
If an assessment item requires multiple answers, specify the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.
The same applies to assessment items with double-barrelled questions or those requiring multiple answers simultaneously. These can confuse students and assessors, as demonstrated in the sample question below:
Identify a hazard and/or environmental concern in the workplace and select the most effective hazard control hierarchy.
Answers might include, but are not limited to:
Weather conditions – work area isolation, engineering controls, PPE
Work area and ground conditions – eliminating hazards, isolation, engineering
People – isolation, engineering, administrative controls
Structural hazards – substitution, isolation, use of engineering controls
Chemical hazards – isolation, engineering controls, administration
Equipment or machinery – isolating, use of engineering controls, administration
Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.
Considering these requirements, you might wonder, “Don’t learning resource developers have audit guarantees?” But these guarantees mean you have to wait for an audit to rectify noncompliance. This impacts your compliance history, so it’s wiser to take a safe and compliant approach.